Many times it is important to define terms in order to understand how to choose a suitable model of pipe bending machine.
Here SLS defines some commonly used terms in the pipe and tube bending industries.
● NC Mandrel Pipe Bending Machine: Numerically controlled rotary draw mandrel tube and pipe bending machines.?
●CNC Mandrel Pipe Bending Machine: PLC or IPC Controlled Rotary Draw mandrel tube
and pipe bending machines;CNC Machines can be 2 or 3 axis which according to customer’s
●CNC Pipe Bending Machine with Multi-Stack: More than one different bending radius
required on the same piece of pipe or tube bending.
●CNC Pipe Bending Machine with Push Bending(Rolling)Function: This can easily
achieve a very large radius bend compared to rotary draw bending. A style of
bending where the bend arm is moved positive a few degrees, then the tube is
pushed through a set of rollers to create the bend. A set of rollers placed on
clamp die position and on the pressure die position. All rollers rotate freely.
A 3D-shaping is possible. The pipe is guided between bending-rolls and
supporting-rolls, while being pushed through the tools. The position of the
forming-roll defines the bending radius. To change the bending plane, a pusher
rotates the tube around its longitudinal axis.
● CNC Pipe Bending Machine with Booster Function: When small CLR bending is required or wall thinning is critical,booster function has the most efficient and innovative solution for producing extra-tight radius bends with minimal deformation.
● Centerline Radius (CLR): Is the measurement of the tube or pipe radius that you will be mandrel or rotary draw bending. This is the distance in mm or inches from the center of tube or pipe curvature to the centerline axis of the pipe or tubing that you will be mandrel bending, or rotary draw bending.
● Here is an easy way to measure the CLR:
Step 1: If there is a bended sample tube or pipe available, place the tube or pipe that you want to bend on a large piece of paper on the floor.
Step 2: Tracing the sample tube or pipe that you would like to mandrel bend onto the paper, continuing the pattern until you have made a full circle with the tube or pipe that you are working with.
Step 3: Measure (in mm or inches) from the center of the tube or pipe to the center of your drawn circle.